Winch Strap with Flat Hook

Winch Strap with Flat Hook

$8.99
Skip to product information
Winch Strap with Flat Hook
WS430FH FHE

Winch Strap with Flat Hook

When you are securing heavy equipment, machinery, or oversized freight on a flatbed trailer, the strap holding the load is not a place to compromise. The Fleet Hero 4" x 30’ winch strap with flat hook is built for commercial truckers, flatbed operators, and fleet professionals who need a high-capacity, weather-resistant tie-down strap that delivers consistent holding power load after load. With a 5,400 lb working load limit, 16,200 lb capacity, and heavy-duty yellow webbing engineered for minimum stretch and maximum wear resistance, this winch strap is tagged, rated, and ready for the demands of professional flatbed operations.

$8.99
*Some bulky and heavy items may have separate shipping conditions.

Strap Width: 4 inches
Strap Length: 30 feet
Working Load Limit: 5,400 lbs
Capacity: 16,200 lbs
End Fitting: Flat hook
Color: Yellow
Weight: 4.50 lbs
Bundle Size: 1-Pack
Compliance: DOT regulated, WSTDA recommended standards; WLL tagged

Winch Strap with Flat Hook 4" x 30’ – 5,400 lb WLL Heavy-Duty Flatbed Tie-Down Strap

Key Features

  • 5,400 lb Working Load Limit with 16,200 lb Capacity
    Rated for the heaviest flatbed applications, this winch strap provides a 3:1 safety ratio between working load and ultimate capacity. The 5,400 lb WLL gives operators the holding power needed for heavy equipment, construction machinery, and oversized freight without approaching the strap’s structural limits under normal operating tension.
  • 4" Wide Heavy-Duty Webbing for Maximum Load Distribution
    The 4-inch webbing width distributes strap tension across a wider contact area than 2" or 3" alternatives, reducing pressure concentration on both the cargo surface and the strap itself. Wider webbing means less wear per haul, longer strap service life, and better protection for cargo surfaces that can be marked or damaged by narrow straps under high tension.
  • Minimum Stretch, Maximum Wear Resistance
    The heavy-duty webbing is engineered for minimum elongation under load, maintaining consistent tension throughout the haul without requiring re-tightening at stops. High wear resistance means the webbing holds up through repeated winding, unwinding, and exposure to the abrasion that flatbed operations subject straps to on every run.
  • Weather-Resistant Construction for All-Condition Performance
    The webbing is manufactured to resist moisture, UV degradation, and the temperature extremes that flatbed straps are exposed to across different seasons and operating environments. A strap that degrades in weather is a strap that fails when you need it most — this webbing is built to maintain its rated performance in the conditions that commercial trucking actually operates in.
  • Flat Hook End for Versatile Anchor Point Connection
    The flat hook end hardware connects securely to standard flatbed winch slots, D-rings, and anchor points without the bulk of a J-hook or the limitations of a wire hook. The flat hook profile is the most widely compatible end fitting for flatbed winch strap applications across the range of trailer configurations in commercial use.
  • DOT and WSTDA Compliant with Tagged WLL
    Every strap is tagged with its working load limit, meeting DOT regulations and WSTDA recommended standards for flatbed cargo securement. Using properly tagged, rated straps is a compliance requirement on every commercial haul — and the tag on this strap gives inspectors and operators the information they need at a glance.

Full Specifications

Strap Width 4 inches
Strap Length 30 feet
Working Load Limit 5,400 lbs
Capacity 16,200 lbs
End Fitting Flat hook
Color Yellow
Weight 4.50 lbs
Bundle Size 1-Pack
Compliance DOT regulated, WSTDA recommended standards; WLL tagged
Primary Applications Flatbed cargo securement, heavy equipment transport, construction machinery hauling, oversized freight tie-down

Best For

  • Flatbed truckers securing heavy equipment, machinery, and oversized freight requiring 4" strap capacity
  • Commercial freight operators running high-WLL tie-down configurations on flatbed and step-deck trailers
  • Construction and heavy equipment transport operations where load weight and cargo surface protection both matter
  • Fleet managers standardizing on DOT-compliant, tagged 4" winch straps across their flatbed trailer fleet
  • Owner-operators upgrading from 2" or 3" straps to 4" capacity for heavier load configurations

Why Choose Fleet Hero

  • Commercial-grade webbing built for flatbed operations — every Fleet Hero winch strap is manufactured to the stretch resistance, wear resistance, and compliance standard that professional cargo securement requires
  • Fast, dependable shipping — your operation can’t wait on missing tie-down equipment; we prioritize quick fulfillment and secure packaging on every order
  • Consistent supply for fleet orders — whether you need one strap or a bulk order for your entire flatbed fleet, you receive the same quality product every time
  • Trucking-focused support — our team understands flatbed cargo securement and DOT compliance requirements and is ready to help you find the right strap width, length, and end fitting for your specific load and trailer configuration

The strap between your winch and your cargo is the component that holds the load for the entire haul. The Fleet Hero 4" x 30’ winch strap with flat hook gives flatbed operators the high-WLL, weather-resistant, DOT-compliant tie-down strap needed to secure heavy loads with confidence — from the loading dock to the delivery point. Add it to your order and tie down every load with hardware rated for the job.

Local pickup is available at our shop location and is typically ready within 24 hours.